Elysis Needle Fractional RF Treatment

We focus on maximizing treatment results while considering patient comfort.

Elysis RF uses micro-needles to make direct contact with the skin, then delivers high-frequency energy to the dermis.

This device can adjust 1MHz and 2MHz frequencies as needed, and features 49-pin non-insulated and dual-depth insulated structures.

This allows for a needle RF treatment that can comprehensively address various skin concerns in a single session.

Key Features and Benefits of Elysus RF Treatment

1) Characteristics of the Non-Insulated 49-Pin Tip

Non-insulated tip used for pore and acne scar management

When the tip is pressed once (single operation), multiple electrodes activate, delivering broad and even stimulation to the dermis.

This creates a dense formation of micro-coagulation zones (areas coagulated or contracted by heat), which can help improve pores and skin texture.

This helps deliver effective stimulation efficiently at a similar pain level.

2) Characteristics of the Insulated Dual-Depth (2-depth) Structure

Insulated tip used for fine lines and lifting management

The Elysus insulated tip continuously delivers high-frequency energy to two different depths with a single penetration.

This protects the epidermis (reducing recovery time burden) while promoting skin improvement through collagen remodeling in the deep dermis.

3) 1MHz and 2MHz Frequency Selection Function

1MHz (Low-Frequency Range): Energy is easily delivered to the deep layers of the skin, making it useful for managing lifting, elasticity, deep wrinkles, large pores, and deep parts of scars.

2MHz (Relatively High-Frequency Range): Primarily acts on the epidermis and upper dermis, and can help improve sebaceous glands, periporal areas, fine lines, skin surface texture, and redness.

This function allows alternating or sequentially applying 1MHz (deep layer) and 2MHz (surface layer) frequencies during a single treatment, enhancing management efficiency.

4) Principle of Applying a Minimum of 350 Shots

For a typical full-face treatment, based on 2 passes (approximately 300 shots), an additional 50 shots or more are applied to areas of primary concern, aiming for a minimum of 350 shots.

Through 49-pin and dual-depth technology, more dense effects can be expected at the same stimulation intensity.

5) Customized Treatment and Skin Booster Combination After Precise Diagnosis

Using a Mark-Vu diagnostic device, the condition of sebum, pores, wrinkles, pigmentation, and redness is quantitatively assessed. Subsequently, for areas with complex issues like pores and scars, or sebum and redness, 2MHz (surface and upper) and 1MHz (deep layer) are sequentially applied to the same area for customized management.

Following this, a skin booster layering method (Stage 1→Stage 2→Stage 3) tailored to the individual's skin concerns is applied to enhance the absorption rate of active ingredients and achieve comprehensive effects.

Elysis Treatment Protocol

1) Precise Skin Analysis (Using Mark-Vu)

Acne: By assessing sebaceous gland activity, inflammation, and redness distribution, a non-insulated tip (for sebum and pores) and 2MHz frequency (for redness) are applied together.

Acne Scars: Scars are categorized by type (boxcar, rolling, red scars), and managed by overlapping 1MHz frequency (deep layer) and a non-insulated tip (surface regeneration).

Treatments are performed by distinguishing between frequency (Hz), non-insulated, and insulated methods according to skin concerns and lesion characteristics. Improvement is sought through a personalized approach.

2) Shot and Pass Design — Considering 350+ Shots

When treating the entire face with 2 passes, approximately 300 shots can typically be delivered.

Overlapping application of 50+ shots on important areas can be applied.

1MHz and 2MHz frequencies are appropriately switched and applied based on the treatment area and the condition of the lesion.

3) Skin Booster Layering (Stage 1 → Stage 2 → Stage 3)

Stage 1 (Surface Layer): Focuses on improving surface skin concerns such as pores, pigmentation, and redness.

Stage 2 (Dermis Layer): Primarily targets fine lines and scars to induce collagen regeneration.

Stage 3 (Intensive Overlap): Re-irradiates the nodal points in areas with multiple overlapping concerns, and helps high-concentration ingredients absorb deeply.

4) Overlap Treatment Design for Overlapping Issues (Example)

If you have concerns about pores and acne: non-insulated 49-pin and 2MHz frequencies can be used to improve sebum and the skin surface, followed by insulated 1MHz to manage the deep layers.

When you want to improve scars and redness at the same time: you can focus on treating the scar base with insulated 1MHz, and add 2MHz to help stabilize redness.

For fine lines and acne scars: 2MHz can be used to refine fine lines and the skin surface, and the upper dermis can be widely and evenly treated with a non-insulated 49-pin.

Basic Principles of Elysium RF Laser Treatment

Needle RF treatment uses microscopic needles to deliver high-frequency energy to the desired skin depth. Through this action, it is the principle that helps with skin improvement.

In the areas treated with Needle RF, micro-coagulation zones are formed.

These micro-coagulation zones stimulate fibroblasts to induce collagen and elastin regeneration.

Non-insulated tips work across a wide range from the epidermis to the upper dermis, while insulated tips are designed to precisely stimulate specific skin layers at desired depths.

Elysium's Dual Depths insulated method can deliver energy to two depths with a single stimulation. Through this, structural improvement within the skin while reducing the burden of post-treatment recovery can be expected.

Introducing Elysium Sense RF (Equipment and Tip Features)

The non-insulated 49-pin tip transfers heat through the entire needle, allowing for wide and even stimulation from the skin surface to the upper dermis. This can help with pore reduction, sebum control, and surface scar improvement. Compared to a typical 25-pin tip, the 49-pin is known to increase effective stimulation density within the same number of shots.

The insulated Dual Depths tip generates thermal energy only at the tip. With a single treatment, energy can be consecutively delivered to two depths, which can induce improvement of deep skin layers while protecting the epidermis.

The variable-length needle (precise targeting) allows for depth adjustment in 0.x mm increments depending on skin thickness and treatment area. This enables selective management of specific tissues such as sebaceous glands, sweat glands, and under-eye fat.

Expected Effects

1) Skin lifting and elasticity improvement, and reduction of deep or shallow wrinkles can be expected.

2) Reduced pore size, controlled sebum secretion, and improved skin surface smoothness can be anticipated.

3) Combined improvement of acne scars (pitted marks and redness)

4) Reduced facial redness and evened skin tone

5) Improved skin pigmentation environment to help reduce the likelihood of melasma recurrence

Recommended for those who

1) Have rolling or boxcar acne scars and red marks

2) Are concerned about enlarged pores and uneven skin texture, or experience frequent breakouts due to excessive sebum production

3) Are concerned about fine lines or decreased skin elasticity

4) Have redness or sensitive skin, or a skin environment with recurrent pigmentation

5) Wish to reduce the burden of treatment sessions and are considering a treatment that focuses on shot efficiency and frequency matching

Treatment Procedure

1) After facial cleansing, precise imaging is performed, followed by an initial consultation via Mark-Vu and an in-depth consultation with the director.

2) The treatment is designed according to the skin condition, and treatment parameters such as depth, power, mode, passes, overlap, and frequency are meticulously planned.

3) The treatment is meticulously performed in two passes using over 350 shots of Needle RF, with particular areas of concern being overlapped.

4) If deemed necessary, a layering technique of skin boosters from stage 1 to stage 3 may be combined.

5) After the procedure, a modeling pack containing Jaungo ingredients is used to soothe the skin's heat.

Post-Treatment Precautions and Side Effects

Erythema and Swelling: Redness and swelling may occur at the treated area, but mostly subside within 6 hours. For some individuals, it may last for about 2 to 3 days.

Micro Scabs: Micro scabs may form after the treatment, and these should be allowed to fall off naturally. Do not forcibly remove them.

Activities to Avoid for 3-4 Days: It is recommended to avoid saunas, jjimjilbangs (Korean bathhouses), swimming, alcohol consumption, smoking, and strenuous exercise for about 3-4 days after the treatment.

Daily Care: Apply ample sunscreen to the treated area, use moisturizers for sufficient hydration, and adequate water intake is also important.

Other Possible Symptoms: Occasionally, temporary skin troubles, itching, stinging, or bruising may appear.